What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 17.06.2025 08:14

One is “what exactly is in a ‘surge protector’ ? ”
Here is a simplified AC power diagram.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Why are there so many single moms in America?
Barnstars:
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
but this device (an Inductor) … impedes the rapid changes in the current.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
How do you emotionally react to when others seem to feel sorry for you?
2024–10–14 [Omar Gharbi Omar Gharbi ]
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
But it can get overloaded, and no longer works.
What should I do to get over a relationship?
This is where the MOV conducts again, and dissipated the energy.
but I think this circuit , shows a few more pieces.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
A circuit breaker is similar, but is resettable.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
so, what happens?
It seems Mohan does not understand the difference between a comment and an Answer.
I post the exact comment here.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Salary you need to live comfortably in Virginia in 2025, according to new study - 13newsnow.com
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
There are three different concepts here that are getting confused.
This is 'the assistant's answer'
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Why is Canada letting too many Indians in Canada?
The MOV will conduct when the voltage exceeds 50% of line voltage.
Upvotes:
2024–10–10[John johnson John Johnson ]
He then asserts :
[old diagram got deleted by accident]
The bolt then partially travels down the line to your home.
What was your embarrassing moment in front of your father-in-law as an Indian daughter-in-law?
2024–10–16 [ OO OLAOYE OYEBODE ]
For this case there are devices called Metal oxide varistors (MOV).
Because the load is inductive, the current lags the voltage.(by a bit).
When gallery photos are deleted at the same time, why are Google photos also deleted?
First Sentence:
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
What does a fuse do?
nine
What did your sister do to you that you can never forget?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
It also is a device that limits the change in current flow.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
the problem then depends on "how fast does the fuse operate?".
Can the fuse protect the electronic devices from lightning instead of a surge protector.
eight
A fuse is a non-resetable over current circuit protector.
This device then solves the entire problem.
An AC voltage/ current source, and an ac inductive load.
This is where this question deviates from being a 'generic' question, and becomes more specific.
what exactly is a ‘surge’ protector?
But… the neutral is now “floating” because of the 1 ohm resistance.
He then describes Rainy Season and Lightning.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
So, the voltage could go up to 500 volts, and the fuse will not open up.
At least they know the answer if they wanted it.
He then describes the function of a fuse.
What is lightning?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
At one ohm, the resistor has a maximum of 1 watt power.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
One
The third is lightning and “how it gets conducted into a home.”
Now when you have a certain ac resistance, then a current flows in a loop.
Edit 2024–10.
[image of Common-mode choke]
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
The other is “what does a “fuse” do?”
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
In schematic diagrams this is the symbol for a fuse:
These are simplified answers to the original question, and does not change anything I wrote above.
There are two important concepts here.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
These devices are installed between the “hot” and “neutral” and protective ground.
This one hit behind the barn.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
(Dc diagram shown, AC is similar).
a photo is worth a thousand words.